Description

Security Boss Petsafe Electronic Sash Dual Pane Lockable Window Insert Pet Door

An RFID pet door that regulates access in and out is a feature of the Security Boss Manufacturing Petsafe Electronic pet door with dual paned window sash. Your pet must wear an RFID collar tag in order to gain access; only your pet may do so. Tempered safety glass and an adjustable, spring-loaded end allow for simple installation and removal on each unit. The Petsafe Electronic pet door can be installed on either side of the window sash, at your discretion.  Two pet opening sizes are available, small 6 5/8″ x 8″, and large 13 1/16″ x 15 3/4″. All Security Boss products are hand built to order.

The heavy duty aluminum framing used in the Petsafe Electronic sash window inserts ensures that the window insert will look great and last for many years. This Petsafe Electronic sash pet door’s components are all entirely replaceable and maintenance-free. You won’t need to buy another window sash pet door after this one.

Note: Please make sure you measure correctly. Once installed, your window opening will be reduced by the width of the door installed

Height Range Adjustment Chart:

See below the height range that corresponds with your Slider opening height

Pet Opening width x height	Overall Height (in inches)	Ranges Offered (in inches)
Small 6 5/8″W x 8″H	18″	23-26.25 26.25-29.5 29.5-32.75 32.75-36 36-39.25 39.25-42.5 42.5-45.75 45.75-49 49-52.25
Large 13 1/16″W x 15 3/4″H	27″	26.25-29.5 29.5-32.75 32.75-36 36-39.25 39.25-42.5 42.5-45.75 45.75-49 49-52.25

1-Year Manufacturer Warranty

For a period of one year from the date of purchase, any defective product or part may be sent, freight prepaid, to Security Boss® Manufacturing LLC for replacement or repair. Proof of purchase date must accompany any returned item. Manufacturer’s liability on any claim shall not exceed the cost of the product.  See complete warranty details here.

Sizing

Measuring for your window insert:

To determine the correct range of window insert you need, open your sash window and measure from left to right inside the channel that the sash window travels up and down in. You want to measure into the deepest part of the channel since the window insert will expand due to the spring loaded end. Your measurement should be with the adjustment range chosen. You might notice that your measurement falls into two ranges, select the once that will allow some room below and above your window width. This will allow the unit to compress enough to insert into your channel and still expand enough for a tight fit. You can always call us for personalized guidance to ensure your choice is correct.

Will These Insert fit all Sash Windows?

All Security Boss Window Insert will fit channels that are at least 1″ wide.

Additional Product Info:

Included Weather Stripping:
Every Security Boss Insert features a replaceable bulb seal that lines both sides of the insert. This bulb seal provides a superior weather seal between the insert and the wall and sliding door. This weather seal can also be replaced if needed very easily by sliding the weatherstripping into the t-slot groove on your patio pet door.

The Weather Seal is a 3″ wide vinyl weather stripping section that attaches to the back side of your sliding door. When an insert is installed, your sliding door breaks the seal between the slider and fixed panel. This weather stripping will seal out any drafts.

Adjustable Width Range:

You will notice that your Security Boss Window insert has a spring-loaded end that compresses and extends within a range of 3.25″ This allows you to compress your unit to fit into the channel that you sash window travels and then extend so that the unit will fit tightly. The two easy turn locking knobs secure this end so that someone from the outside would not be able to gain entry.

How does my Sliding Door Lock?

We strongly suggest bracing the open sash window with a stick or an adjustable brace bar; as this immobilizes your slider and is the most effective way to secure your sliding door. We also offer several locking devices that can lock the open window to your frame via various bolt type locks.

Use of Extensions Ranges:

You can add 2 inch extensions to the top of all insert heights to extend their reach or adjustment range. These extensions snap into the top of your insert and fit tightly. No screws or hardware are required. It is possible to add more than two (2) extensions on the Security Boss Inserts. The snap in lock feature of the extensions allow for a stable firm unit regardless of the number of extensions are added.

Shipping

Security Boss Doors ship from Wisconsin via FedEx Ground

• Items normally ship in 1-3 business days from date of order, however custom or larger orders can take longer
• Use the map below to estimate shipping transit time to your location

 

Fast Shipping

We do our best to ship FAST and make it easy for you.  At the top of this page, we have noted how long it normally takes to process and ship your order.  You can then use the map above to estimate delivery times.  We will send you an email confirmation with the tracking number as soon as your order ships

Please see our Shipping Policy for full details.

Returns

4-Sided Exterior Professional Doors are all made to the customer’s specifications, therefore they are non-returnable, non-refundable. 

Please see our Return Policy for full details.